3DXTech Thermax™ PPSU Filament 1.75mm 500g Natural

$215.95

ThermaX™ PPSU [Polyphenyl Sulfone] is considered one of the highest performance plastics in the industry. This high-temperature amorphous polymer that offers excellent mechanical, thermal, and chemical resistance properties.

In stock

Free shipping on orders over $149!

  • Check Mark Satisfaction Guaranteed
  • Check Mark Premium Support
  • Check Mark Secure Payments
  • Check Mark Local Stock
GUARANTEED SAFE CHECKOUT
SKU: PPU1010500NAT Category:

Description

ThermaX™ PPSU 3D Printing Filament

Polyphenylsulfone (PPSF or PPSU) is a high-temperature aromatic sulfone polymer. Long considered to be one of the highest performance polymers in the plastics world. PPSU has excellent thermal and chemical resistance, making it well suited for demanding applications in automotive, aerospace, electronics, defense, industrial, medical, semi-con applications. Previously only available to Stratasys® customers – now you can print with this ultra performance polymer.

Benefits of ThermaX™ PPSU:

  • Very high thermal properties superior to Ultem™ 1010
  • Tg of 220°C and HDT of 205°C
  • High Environmental Stress Crack Resistance (ESCR)
  • Sterilization capable, including EtO gas, radiation, steam autoclaving, plasma, dry heat and cold sterilization
  • Exceptional strength and modulus, even at elevated temperatures
  • Outstanding impact resistance
  • Highly resistant to even large (10 Mrd) doses of gamma radiation
  • Resists most common automotive fluids including gasoline, antifreeze, transmission fluids, motor oils, power steering fluid, windshield washer fluid (ESCR, 24 hrs, 100°C)
  • Inherently flame retardant with low smoke evolution and low smoke toxicity
  • Excellent dimensional stability with low creep sensitivity, low and uniform coefficient of thermal expansion, and highly reproducible part-to-part dimensions.

Filament Specifications:

1.75mm and 2.85mm +/- 0.05mm in diameter

1.37g/cm3 density

Recommended PPSU Print Settings:

  • Extruder: 340-390°C
  • Bed Temp: 140-160°C
  • Bed Prep: Nano Polymer Adhesive and 3DXTECH Polyimide Tape work best for us.
  • Heated Chamber: Recommended
  • Supports: ThermaX™ HTS High-Temp Support is designed specifically to work with high-temp materials like this one.
  • Other: No cooling fan and print speeds of 16 mm/s as a starting point.
  • Drying Instructions: 120°C for 4 hours.

Safety and Technical data sheets

PPSU_SDS_v01

PPSU_TDS_v03

Additional information

Weight 0.75 kg

Reviews

There are no reviews yet.

Be the first to review “3DXTech Thermax™ PPSU Filament 1.75mm 500g Natural”

Your email address will not be published. Required fields are marked *