DeltaWASP 2040 Industrial X 3D Printer

SKU: PID-00386-00
Product Summary

Rapid Prototyping for Every Design

Optimised with a dual gear filament driver and a heated chamber with cooled mechanisms, the 2040 Industrial X can print all types of specialty filaments with ease and is the ideal printer for technical designs.

 

$8,817.00
SAVE $666 (7% OFF)
Enquire Product Enquiry
GUARANTEED SAFE CHECKOUT Buy now with interest-free Installments
Zippay Afterpay
Free Shipping In Stock
Free Shipping FREE SHIPPING ON ORDERS OVER $99 T&C'S APPLY

DeltaWASP 2040 Industrial X 3D Printer

The DeltaWASP 2040 Industrial X 3D Printer is a top-of-the-line 3D printing machine that delivers high-quality results with industrial-grade precision. This printer features a large build volume of 200 x 400 mm and a closed build chamber, allowing for stable temperature control and the ability to print with a wide range of materials.

Equipped with a powerful extruder and a precision mechanical system, the DeltaWASP 2040 Industrial X 3D Printer can handle even the most complex prints with ease. The printer also comes with advanced features such as automatic bed levelling, a filament runout sensor, and a touchscreen interface for easy operation.

Whether you're a professional designer or a hobbyist, the DeltaWASP 2040 Industrial X 3D Printer is an excellent choice for anyone looking for a reliable and high-quality 3D printing solution.

DeltaWASP 2040 Industrial X Special Features

The DeltaWASP 2040 Industrial X boasts an aluminium body, steel cored belts, and features thermal and acoustic insulation. The new Hot and Cold Technology allows the chamber to be heated up to 70°C, while simultaneously cooling the mechanics of the printer. This results in fast prints when using technical materials, without damaging the moving parts of the printer. The new Filament Driver X replaces the suspended bowden setup, doubling the grip and tripling the force when compared to a regular bowden driver. This is a direct result of two hardened steel gears within the filament driver. Also included in the Industrial X line is an auto-calibration feature.

Equiped with the WASP ZEN X extruder, printing with multiple materials up to 350°C is no challenge for the 2040 Industrial X. The new WASP Zen X extruder also allows for quick tool-changes between cartridges. The WASP FLEX extruder can simply be switched to print flexible materials down to Shore 50A within minutes.

The Industrial X Series can be connected to WiFi in order to monitor and send GCODE remotely from your smart device or PC and features a camera installed inside to monitor your prints.

  • Continuous Print: When the used extruder runs out of filament, the print continues with the other extruder (if correctly loaded)
  • Bed Touch System: Automatic system that avoids the collision of the extruder on the plate.
  • GCODE Analyzer: GCODE error checking system.
  • Auto Check System: Automatic error recognition routine
  • Mesh Auto Calibration: Mesh plate calibration
  • Hot and Cold Technology: Heated chamber and cooling of the mechanics
  • WIFI: Machine connects to the network for monitoring and control
  • New GUI: New touch interface with bigger TFT display
  • Camera: On-board for monitoring and timelapse
  • Remote Intervention: WASP technicians can work from remote on your machine in case of issues

RESURRECTION SYSTEM (cc)
The system recovers automatically interrupted prints in case of accidental shutdown or blackouts.

FREE ZETA SYSTEM (cc)
It’s possible to measure the height of interruption of the print and restart from there.

Box Contents

  • 1x DeltaWASP 2040 Industrial X 3D Printer
  • 1x 1kg Spool of PLA
Build Volume 200(diameter) x 400(height) mm
Heated Chamber Up to 70°C
Minimum Layer Height 50 micron
Maximum Print Speed 300 mm/sec
Maximum Travel Speed 500 mm/sec
Acceleration 10.000 mm/sec²
Bed Temperature Up to 120°C
Standard Extruder / Nozzle WASP ZEN X Extruder with MT cartridge, Nozzle 0.4 mm
Compatible Materials 1.75 mm ZEN X EXTRUDER: ASA | ABS | HIGH-IMPACT PS | PETG | POLYCARBONATE | PC+ABS | PPS | PMMA | PVA | PA | PA-Carbon | PLA
2.85 mm FLEX EXTRUDER: TPU | TPE | POLYPROPYLENE
Compatible Extruders ZEN X EXTRUDER: Dual extruder for single material, multicolor or multimaterial prints, with end filament sensor.
Nozzle diameter: 0.4 mm, 0.7 mm, 1.2 mm (filament diameter 1.75 mm)
FLEX EXTRUDER: Direct driven extruder for flexible material down to shore 50A.
Nozzle diameter: 0.4 mm (filament diameter 3 mm)
Operating Systems Windows | Mac | Linux
Slicing Software Compatible with all slicing softwares (Cura – SLic3r – Simplify3D®)
File Type STL | OBJ | GCODE
Connectivity Pendrive USB | WiFi
Interface TFT Touchscreen
Dimensions 49 x 44 x 87 cm
Net Weight 38 kg
Input 220V, 50/60 Hz
Power Consumption Max. 120 W
Operating Temperature 20-30°C
Storage Temperature 0-30°C
Material Construction Frame and Cover: Aluminum, Steel, Polycarbonate, PU. All metal body for a stiff and vibration free precise machine.
Bed: Machined Aluminum
Movements: Nylon wheels on anodized Aluminum sliders, PU steel core belts, resistant to high temperature.
Insulation: Polymer foam for thermo-acoustic insulation.
Motors: Stepper

There are no reviews yet.

Add a Review

My Shopping Cart

Added item to your cart

Cart Summary