E3D – Volcano 1.0mm x 1.75mm Plated Copper Nozzle
- Satisfaction Guaranteed
- Premium Support
- Secure Payments
- Local Stock
Choose the right material:
Nozzle X is the last nozzle your 3D printer will ever need. Made from a hardened tool-steel base, they are then Nickel plated to maintain hardness at elevated temperatures, and have a WS2 coating applied to provide the nozzle with reduced stick properties. Rated to a maximum temperature of 500°C, Nozzle X prints every printable material*, from PLA all the way to Carbon Fibre-filled PEEK without wearing.
Brass nozzles, featuring E3D’s signature internal geometry, have optimal thermal properties for everyday printing, providing smooth layers for standard non-abrasive applications. Rated to a max temperature of 300°C.
Stainless steel nozzles are suitable for food-grade printing, or applications where the lead content of the brass nozzles is unsuitable. Rated to a maximum temperature of 500°C.
Our unique plated copper nozzles are suitable for high-temperature, non-abrasive applications. The nickel plating provides a reduced-stick surface, ideal for situations where temperatures are too hot for a silicone sock. Rated to a maximum temperature of 500°C.
Hardened steel nozzles are good utility nozzles, suitable for abrasive filaments such as wood fills, glitter fills and metal fills. Even glow-in-the-dark filaments will abrade brass so our Hardened Steel nozzles are a great, lower-cost option when you can’t stretch to a Nozzle X. Rated to a maximum temperature of 500°C. Please note this nozzle is not suitable for printing abrasive filaments at temperatures above 350°C.
Volcano nozzles are not compatible with the V6, SuperVolcano or Cyclops heater blocks.
E3D nozzles are identifiable with markings on the flats of the hex head, please see the table below for identification.