FREE SHIPPING TO METRO AREAS T&C APPLY
FREE SHIPPING OVER $99 TO METRO AREAS CONDITIONS APPLY
Notice
Fillamentum Flexfill PEBA 90A 1.75mm 500g
SKU:
PID-00992-00
Product Summary
This type of Flexfill is based on polyether-block-amide (PEBA), which was specially developed for processing by 3D printing. Although it is flexible with hardness 90 Shore A, it exhibits different thermal, mechanical, and chemical behavior from other Flexfill filaments (TPU, TPE).
Working temperature: | 225–245 °C |
Heated bed: | 70–90 °C |
SAVE $64 (50% OFF)
Features:
- Excellent mechanical properties
- Flexible even at low temperatures
- High reversible deformation
- Rebound resilience preserved also at low temperature (down to -60 °C)
- Great chemical resistance, for mention against car fluids (gasoline, diesel, oil, ...)
- Resistant to cyclic loading without obvious damage
- High energy return, low hysteresis
- Tear resistance
- The lowest density from flexible filaments
- Recyclable, BPA free
- Low fumes released
- Safe for food contact applications (declaration sent per request)
- Safe to use in electrical and electronic equipment
Working temperature: | 225–245 °C |
Heated bed: | 70–90 °C |
Diameter: | 1.75 mm |
Diameter tolerance: | +/- 0.10 mm |
Weight: |
500 g of filament (+ 230 g spool)
|
The length of the filament: |
210 m (1.75 mm, 500 g)
|
RAL | Pantone | HEX: |
N/A | N/A | N/A
|
- 3D Printing Guide
- Webinars
- The use of a direct drive extruder is highly recommended
- For good adhesion use PVA glue or Magigoo PA
- Moisture sensitive – dry before use and keep in a protective resealable sachet
- Drying filaments before processing
- Spools Dimension
- Data Sheets
Comparison of Fillamentum's Flexfill family:
Flexfill TPU | Flexfill TPE | Flexfill PEBA | ||
Polymer base | Polyurethane + ester | Polyolefin + SEBS | Polyamide + ether | |
Tensile strength | 49 MPa | 5 MPa | 36 MPa | |
Elongation at break | 600 % | 250 % | > 1000 % | |
Density | 1.20 g/cm3 | 1.15 g/cm3 | 1.00 g/cm3 | |
Sensitivity to moisture | High | Low | High | |
Chemical resistance | Oils, greases, ozone | Water, acids, alcohols, alkalis | Car fluids, toluene, acetone, ozone | |
Food & skin contact | Not recommended | Certificated | Not certificated | |
Gas permeability | High | Low | Medium | |
Optical properties | Glossy, transparent | Matte, non-translucent | Glossy, very transparent | |
For example, ideal for applications | Vibration | Anti-vibration, damping | Anti-vibration, damping | Vibration and energy transfer |
Skin contact | - | Long-term touch of human skin (holding in hands) | - | |
Under temperature | +80–100 °C | +80 °C | -40 °C | |
In contact with | Oils | Water | Car fluids | |
Abrasion | Sliding abrasion | - | Impingement abrasion | |
Other | - | Outdoor | Low density | |
- | - | Rebounding |
Food Contact Declaration by request on helpdesk@fillamentum.com
There are no reviews yet.