Fillamentum Flexfill TPU 92A 1.75mm 500g

Features:

Can be used for the final surface treatment
Great interlayer adhesion ensuring tear strength in all the directions
Excellent abrasion resistance
Good rebound resilience
High elasticity with highly reversible deformation
Safe to use in electrical and electronic equipment
Flexible
Low warping
BPA-free and styrene-free
Recyclable

Working temperature: 220–240 °C
Heated bed: 50–60 °C
Diameter: 1.75 mm
Diameter tolerance: +/- 0.10 mm
Weight:
500 g of filament (+ 230 g spool)

The length of the filament:
175 m (1.75 mm, 500 g)

RAL | Pantone | HEX:
N/A | N/A | N/A
3D Printing Guide
Webinars
The use of a direct drive extruder is highly recommended
For good adhesion and easy removal of the object use PVA glue
Moisture sensitive – dry before use and keep in a protective resealable sachet
Drying filaments before processing
Spools Dimension
Data Sheets

Comparison of Fillamentum's Flexfill family:

Flexfill TPU Flexfill TPE Flexfill PEBA
Polymer base
Polyurethane + ester Polyolefin + SEBS Polyamide + ether
Tensile strength
49 MPa 5 MPa 36 MPa
Elongation at break
600 % 250 % > 1000 %
Density
1.20 g/cm3 1.15 g/cm3 1.00 g/cm3
Sensitivity to moisture
High Low High
Chemical resistance
Oils, greases, ozone Water, acids, alcohols, alkalis Car fluids, toluene, acetone, ozone
Food & skin contact
Not recommended Certificated Not certificated
Gas permeability
High Low Medium
Optical properties
Glossy, transparent Matte, non-translucent Glossy, very transparent
For example, ideal for applications Vibration Anti-vibration, damping Anti-vibration, damping Vibration and energy transfer
Skin contact - Long-term touch of human skin (holding in hands) -
Under temperature +80–100 °C +80 °C -40 °C
In contact with Oils Water Car fluids
Abrasion Sliding abrasion - Impingement abrasion
Other - Outdoor Low density
- - Rebounding