MakerBot Nylon Carbon Fiber for METHOD
Print Strong, Heat-Resistant Metal Replacement Parts
Carbon fiber reinforced nylon optimized for high strength to weight ratio, stiffness, and heat resistance making it ideal for structural applications and metal replacements.
MakerBot Nylon Carbon Fiber Special Features
Nylon Carbon Fiber has the highest peak performance in all categories, it is significantly affected by moisture which will reduce both strength and modulus.
Nylon 12 Carbon Fiber is less affected by moisture and will retain more of its performance in the presence of moisture.
MakerBot Nylon Carbon Fiber is supported by Stratasys® SR-30 support material for unrestricted geometric freedom and is ideal for demanding applications in the automotive, power and utilities, agriculture, oil and gas, and mass transit industries.
The Nylon Carbon Fiber Material for METHOD has been designed and tested to work perfectly with MakerBot’s industrial grade printer, and is shipped in a vacuum-sealed metalised polyester bag to preserve its quality right up until opening. The filament comes wound around a Smart Spool™ that contains all the information that the printer needs, including material type, colour, and remaining amount via an embedded RFID chip that communicates directly to MakerBot Print.
MakerBot Nylon Carbon Fiber Specifications
MakerBot Nylon Carbon Fiber:
- Printer Compatibility: METHOD | METHOD X
- Extruder Compatibility: Material Extruder 1C | Support Extruder 2 | Support Extruder 2XA
- Support Material Compatibility: Stratasys® SR-30 | PVA
- Heat Deflection @ 0.455MPa: 184°C
- Tensile Strength: 110MPa
- Tensile Modulus: 7,600MPa
- Finished Part Dimensional Accuracy: ± 0.2mm
- Data Sheet
- Dimensions & Weight:
- Spool Diameter: 218mm
- Spool Width: 42mm
- Material Diameter: 1.75mm
- Net Weight: 500g
MakerBot Nylon 12 Carbon Fiber:
- Printer Compatibility: METHOD | METHOD X
- Extruder Compatibility: Material Extruder 1C | Support Extruder 2 | Support Extruder 2XA
- Support Material Compatibility: Stratasys® SR-30 | PVA
- Heat Deflection @ 0.455MPa: 154°C
- Tensile Strength: 66MPa
- Tensile Modulus: 6,000MPa
- Finished Part Dimensional Accuracy: ± 0.2mm
- Data Sheet
- Dimensions & Weight:
- Spool Diameter: 218mm
- Spool Width: 42mm
- Material Diameter: 1.75mm
- Net Weight: 500g
Further Information
MakerBot METHOD bridges the gap between industrial and desktop 3D printing. It was developed from the ground up leveraging industry-leading Stratasys® patents including a heated build chamber, precision dissolvable supports, and dry-sealed material bays.
Engineers and designers use METHOD to create prototypes, jigs and fixtures, and end-use parts.
Learn more at https://www.makerbot.com/3d-printers/method/
There are no reviews yet.