Phrozen Aqua-Blue 3D Printer Model Resin – 1kg
Phrozen Aqua-Blue is a fantastic model resin. Besides, it’s the vibrant colour it performs fantastically. Low warpage, shrinkage and dimensional accuracy are just a few of its key features.
Phrozen Aqua-Blue is a fantastic model resin. Besides, it’s the vibrant colour it performs fantastically. Low warpage, shrinkage and dimensional accuracy are just a few of its key features.
Key Features:
* Low Shrinkage & High Precision - Phrozen Aqua-Blue is developed for low shrinkage and high precision printing. Its low warpage & dimensional stability are especially good for precise parts.
* Low Viscosity & Odour -Phrozen Aqua-Blue is easy to print and post-process due to its low viscosity. Meanwhile, its low odour makes it a breeze to work with.
* Fast-Printing - Phrozen Aqua-Green is customized for 405nm LCD printer. Cure time per layer: 7 sec on Shuffle & 1.5 sec on Sonic (50µm).
* Wide Application - Printed parts have optimal hardness and toughness. Perfect match not only for models but also for prototyping.
Specifications:
* Contents: 1kg per bottle
* XY Planar Resolution: 50 micron
* Z Resolution (Layer Height): 30-100um
* Cleaning: Clean with alcohol spray (or Phrozen wash). Dry with an air gun or compressed air. Do not immerse model in the cleaning solution for long periods
* Suitable for: LCD 3D Printer
* Application: General model resin/Prototyping
* Colour: Aqua-Blue
* Low viscosity
Performance:
* Viscosity: 125 cps
* Proportion: 1.1
* Tg:80 °C
* Hardness: Shore 86D
* Elongation: 21%
* Break value: 24 MPa
* I-Zod Impact:1.81 KJ/m2
Operation:
* Avoid exposure to sunlight and indoor luminescence
* Return resin from VAT to bottle. Be sure to filter
* Please preserve resin in a closed opaque bottle to avoid both air and light exposure
* Do not mix resins together
* Please keep the resin away from children
* Please do not dump resin. Please dispose of responsibly. Cure and add to general waste/plastics
Safety:
* Do not eat or swallow resin. If ingested seek medical advice immediately
* Wear goggles to avoid eye contact with resin. If resin comes in to contact with eyes wash thoroughly and seek medical advice immediately
* Resin may cause slight irritation to skin. Gloves should always be worn when handling resin. If an allergic reaction occurs stop using immediately
* Resin has a mild odour. We strongly recommend you to use in a well-ventilated room or area
* Recommended safety equipment: gloves, mask, goggles
* Store resin in a cool dry place. 15-35 degrees recommended
Amazing Quality Resin, Heaps better than Anycubic resin and a lot better than Monocure 3D, Way less odour than monocure which has strongest smell. Also prints beautifully and the prints are stronger.
probably the best resin i've ever used for capturing sharp and crispy details in miniatures. this is most likely because of its low viscosity, which is perfect for this kind of printing. if you're into printing for the tabletop scene definitely pick up this resin!