Phrozen Aqua-Grey 8K Resin 1kg

Phrozen’s new Aqua-Gray 8K resin is designed to showcase 3D models in high resolution and works best with the Sonic Mini 8K 3D Printer. With its special formula, Aqua-Gray 8K creates high-quality & extremely intricate 3D models with 8K resolution.

Specifications:

• Density: 1.1 g / cm3
• Viscosity: 330 cps
• Tensile Strength (Break): 43.17  Mpa
• Elongation: 18 %
• I-ZOD Impact Strength: 11.73 KJ/m2
• Surface Hardness, Shore D: 85 Shore D

Pre-Cautions:

• Way to Rinse: Clean with alcohol spray with an air gun. DO NOT immerse the model into alcohol for a long time.
• Use and preserve resins in room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during the operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year.