Phrozen SC-801 Clear 3D Printer Resin - 500g

Phrozen SC-801 Clear Resin is possibly the clearest 3D Printer Resin on the market to date. If you need clear. We mean “REALLY CLEAR”. Then look no further!

$129.95$239.95

Clear
SKU PZ(SC)3DPO-1 Categories ,

Description

Phrozen SC-801 Clear Resin is possibly the clearest 3D Printer Resin on the market. If you need clear. REALLY CLEAR. Then look no further!

Specification & Performance

  • Volume: 500g
  • XY Resolution: 0.075 mm
  • Layer Height / Parameter: 20 sec @ 50microns
  • Key Performance: Highly transparent resin. Does not yellow. Low powered UV curing light recommended for post-cure.
  • Cleaning Part: Use alcohol spray (or Phrozen Wash) to clean models and dry  by air gun or compressed air. Do not immerse printed part into alcohol for more than 30 sec.
  • Application: Optical part, transparent models

Key Performance: 

  • Viscosity: 142 cps
  • Proportion: 1.1
  • Tg: 73 °C
  • Elongation: 17 %
  • Break value: 12 MPa
  • Surface hardness: Shore 70D
  • I-Zod Impact: 2.68 KJ/m2

Operation:

  • Avoid exposure to sunlight and indoor luminescence
  • Return resin from VAT to bottle. Be sure to filter
  • Please preserve resin in closed opaque bottle to avoid both air and light exposure
  • Do not mix resins together
  • Please keep the resin away from children
  • Please do not dump resin. Please dispose of responsibly. Cure and add to general waste/plastics

 Safety:

  • Do not eat or swallow resin. If ingested seek medical advice immediately
  • Wear goggles to avoid eye contact with resin. If resin comes in to contact with eyes wash thoroughly and seek medical advice immediately
  • Resin may cause slight irritation to skin. Gloves should always be worn when handling resin. If allergic reaction occurs stop using immediately
  • Resin has mild odour. We strongly recommend you to use in a well ventilated room or area
  • Recommended safety equipment: gloves, mask, goggles
  • Store resin in a cool dry place. 15-35 degrees recommended

Additional information

Weight0.6 kg
Dimensions9 × 9 × 17 cm
Selection

Buy 1 For $129.95, Buy 2 For $239.95

Notes

Suggest using our resin and printer indoor under the ventilated situation.
Avoid exposure to sunlight and indoor luminescence.
Please preserve our resin in a closed opaque bottle in avoid of exposure to air.
Do not mix used and non-used resin together.
Please keep the resin away from kids.
Do not dump resin. Please cure the resin and treat/recycle it as general plastics garbage.
Safety Rules
Do not eat and swallow the resin. Go to the hospital if necessary.
Wear goggles in avoid eye contact with the resin. Wash your eyes by water and go to the hospital if necessary.
The resin might cause slight irritation to the skin. Wear gloves when handling. Stop using it if allergy occurred.
The resin is with a slight odour. We strongly suggest you use it under ventilated condition.
Suggested safety equipment: gloves, mask, goggles, and lab coat.
Keep resin in room temperature(15 – 35 OC) and dry condition.

Reviews

There are no reviews yet.

Be the first to review “Phrozen SC-801 Clear 3D Printer Resin – 500g”

Your email address will not be published. Required fields are marked *