Phrozen TR300 Ultra High Temp 3D Printer Resin – 1kg (Grey)

$149.95

Phrozen’s TR300 Resin 1kg comes with extreme high thermal resistance, high mechanical strength, and with a certain toughness, making it ideal for high temperature applications such as dental thermoforming and industrial mock-ups.

Specifically designed for a 405nm LCD 3D printer, TR300 Resin takes only 1.3 sec. to cure while printing with Phrozen’s Sonic Series 3D printers.

 

In stock

Free shipping on orders over $149!

  • Check Mark Satisfaction Guaranteed
  • Check Mark Premium Support
  • Check Mark Secure Payments
  • Check Mark Local Stock
GUARANTEED SAFE CHECKOUT
Categories: ,

Description

Specifications

  • Volume: 1Kg per bottle
  • XY Planar Resolution: 0.035 mm
  • Recommended Layer Height: 30-100um
  • Way to Clean: Use alcohol spray to clean and air-gun to dry it. Avoid immersion to alcohol for over 30 seconds.
  • Performance:
    • Viscosity: 160 cps at 25Oc
    • Density: 1.1 g/cm3
    • Tg (Glass Transition Temperature):220 °C
    • Tensile Elongation at break: 2 %
    • Tensile Strength at break: 32 MPa
    • Tensile Modulus: 1850 MPa
    • Surface Hardness: Shore 80D
    • Pencile Hardness: 5H (@500g load)
    • IZOD notched Impacted Strength: 8 KJ/m2

Pre-cautions

  • Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.
  • Use and preserve resins in room temperature, and in dark and ventilated conditions
  • Shake well before each use
  • After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
  • Keep resin away from kids and away from direct sunlight exposure
  • Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
  • DO NOT dump resin. Please cure it and treat it as general plastic garbage.
  • After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year

Reviews

There are no reviews yet.

Be the first to review “Phrozen TR300 Ultra High Temp 3D Printer Resin – 1kg (Grey)”

Your email address will not be published. Required fields are marked *