Phrozen TR300 Ultra High Temp 3D Printer Resin – 1kg (Grey)

Specifications

• Volume: 1Kg per bottle
• XY Planar Resolution: 0.035 mm
• Recommended Layer Height: 30-100um
• Way to Clean: Use alcohol spray to clean and air-gun to dry it. Avoid immersion to alcohol for over 30 seconds.
• Performance:
  • Viscosity: 160 cps at 25Oc
  • Density: 1.1 g/cm3
  • Tg (Glass Transition Temperature)：220 °C
  • Tensile Elongation at break: 2 %
  • Tensile Strength at break: 32 MPa
  • Tensile Modulus: 1850 MPa
  • Surface Hardness: Shore 80D
  • Pencile Hardness: 5H (@500g load)
  • IZOD notched Impacted Strength: 8 KJ/m2

Pre-cautions

• Way to Rinse: Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.
• Use and preserve resins in room temperature, and in dark and ventilated conditions
• Shake well before each use
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and away from direct sunlight exposure
• Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
• DO NOT dump resin. Please cure it and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend you finish it as soon as possible as unopened resins only have a shelf life of one year