Bambu Lab Support for PLA White

SKU: S02-W0-1.75-500-spL
$59.95
 
GUARANTEED SAFE CHECKOUT Buy now with interest-free Installments
Zippay Afterpay
Free Shipping Out of Stock
Free Shipping FREE SHIPPING ON ORDERS OVER $99 T&C'S APPLY

Bambu Lab Support for PLA White

Go green without sacrificing performance. The Bambu Lab Support for PLA makes 3D printing eco-friendly and effortless. With settings pre-loaded onto an RFID chip, just load the spool and print—no tedious setup required. The PLA plastic is plant-based and biodegradable, producing less waste than typical filaments. Your creations will come out crisp, clean, and consistent thanks to strict quality controls and the filament’s dimensional accuracy.

When you want to unleash your creativity without harming the planet, Bambu Lab Support for PLA has you covered. Print everything from gadgets and toys to decorations and vases with a material that’s as versatile as it is virtuous. Eco-chic has never looked so good. Reduce your footprint and support sustainability with Bambu Lab Support for PLA that’s as easy on your conscience as it is on your wallet.

 

图片加载失败文案

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

图片加载失败文案

What's in the Box

Filament with Spool*1 & Desiccant*1

Filament Label*1

Package*1

图片加载失败文案图片加载失败文案图片加载失败文案

Attribute Comparision

Support for PLA Support for PA/PET
Color White Green
Nozzle Temperature 210-230°C 270-290°C
Bed Temperature 35-45°C 80-100°C
Print Speed <200mm/s <100mm/s
Water Soluble No No
Recommended for PLA PA-CF, PA-GF, PET-CF
Cannot be used with PA-CF, PA-GF, PET-CF, ABS, PETG, TPU, ASA PLA, ABS, PETG, TPU, ASA

 

1. Support filament cannot be used to print an item alone, but only to print the supporting portion of that item. AMS is recommended for multi-material printing with Bambu Support filament.
2. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.
Recommended Printing Settings
Drying Settings before Printing 55 °C, 8 h
Printing and Keeping Container’s Humidity < 20% RH (Sealed, with Desiccant)
Nozzle Temperature 220 – 230 °C
Bed Temperature (with PVP Glue) 35 – 45 °C
Printing Speed < 200 mm/s

 

Physical Properties
Density 1.22 g/cm³
Vicat Softening Temperature N / A
Heat Deflection Temperature N / A
Melting Temperature 190 °C
Melt Index 6.4 ± 1.2 g/10 min

 

Mechanical Properties
Tensile Strength N / A
Breaking Elongation Rate N / A
Bending Modulus N / A
Bending Strength N / A
Impact Strength N / A

There are no reviews yet.

Add a Review

My Shopping Cart

Added item to your cart

Cart Summary