FREE SHIPPING TO METRO AREAS T&C APPLY
FREE SHIPPING OVER $99 TO METRO AREAS CONDITIONS APPLY
Notice
Fillamentum Nylon AF80 Aramid 1.75mm 600g
SKU:
PID-00996-00
Product Summary
This filament is made of polyamide 12 reinforced with 8 % of aramid fibers. Its benefits are tribological properties, great chemical resistance, high stability under a wide range of temperatures, and great processing.
All of these make it suitable for the fabrication of products like an unwinding wheel, bearings, or cogwheels. It’s a durable material that resists a wide range of chemicals, including car fluids.
| Working temperature: | 235–260 °C |
| Heated bed: | 80–110 °C |
SAVE $36 (30% OFF)
Features:
- Good interlayer adhesion
- Mechanical properties retained in range -40 °C up to +140 °C
- Tribological properties
- Smooth surface
- Good hardness
- Wear resistance
- Creep resistance (resistance against deformation under long-term load)
- Stiffness & strength
- Heat resistance even under high loads
- Low thermal expansion
- Chemical resistance against a wide range of substances
- Low density
- Safe to use in electrical and electronic equipment
- Low fumes released, BPA-free, styrene-free
| Working temperature: | 235–260 °C |
| Heated bed: | 80–110 °C |
| Diameter: | 1.75 mm |
| Diameter tolerance: | +/- 0.10 mm |
| Weight: |
600 g of filament (+ 230 g spool)
|
| The length of the filament: |
243 m (1.75 mm, 600 g)
|
| RAL | Pantone | HEX: |
N/A | N/A | N/A
|
- Abrasive – Wear-resistant nozzles are recommended!
- 3D Printing Guide
- Webinars
- For good adhesion use Magigoo PA or PVA glue
- Keep in non-translucent resealable sachet, bag, or box to minimize the effect of UV light
- Moisture sensitive – dry before use
- Drying filaments before processing
- Spools Dimension
- Data Sheets
Comparison of Fillamentum's Nylon family:
| Nylon AF80 Aramid | Nylon CF15 Carbon | Nylon FX256 | |
| Tensile strength | 50.4 MPa | 54.5 MPa | 45 MPa |
| Elongation at break | 5.8 % | 103 % | 50 % |
| Impact resistance | 53.2 kJ/m² (unnotched) ★ | 86.2 kJ/m² (unnotched) ★ | 7 kJ/m² (notched) ★★★ |
| Ease of printing | ★★★ | ★★ | ★ |
| Wear resistance | ★★★ | ★★★ | ★★ |
| Creep resistance | ★★★ | ★★★ | ★ |
| Heat resistance | from -40 °C up to 140 °C | from -40 °C up to 140 °C | from -40 °C up to 140 °C |
| Heat resistance at high load | ★★★★ | ★★★ | ★ |
There are no reviews yet.