FREE SHIPPING TO METRO AREAS T&C APPLY
FREE SHIPPING OVER $99 TO METRO AREAS CONDITIONS APPLY
Notice
Fillamentum PC/ABS Filament 1.75mm 600g
SKU:
PID-00997-00
Product Summary
PC/ABS is a polycarbonate and acrylonitrile butadiene styrene blend with excellent properties that make this high-tech material ideal for application in the automotive industry.
It is also resistant to high temperatures and can be used as a part of consumer or office electronics. It’s perfect for printing parts of printers, copiers, game consoles, or keyboards. It’s a filament that is light but strong at the same time and shows minimal signs of wear even after long-term use.
| Working temperature: | 260–280 °C |
| Heated bed: | 90–105 °C |
SAVE $15 (30% OFF)
Features:
- Durable
- Good interlayer adhesion
- Smooth finish
- Creep resistance (resistance against deformation under long-term load)
- Chemical resistance against alcohols, oils, greases, ozone, and water
- Excellent temperature resistance up to 115 °C
- Impact resistance also at low temperatures
- Higher flexural strength than ABS, ASA, and HIPS
- Recyclable, non-toxic
- Safe to use in electrical and electronic equipment
Additional Information:
- 3D Printing Guide
- For proper printing of high-temperature-resistant materials with higher speed and quality, use a 3D printer with a heated chamber
- For good adhesion use Magigoo PC
- Moisture sensitive – dry before use
- Drying filaments before processing
- Spools Dimension
- Data Sheets
Comparison of Fillamentum's styrenic polymers:
| PC/ABS | ASA Extrafill | ABS Extrafill | HIPS Extrafill | |
| Weather resistance | yellowing | UV stability | yellowing | yellowing |
| Tensile strength | 42 MPa | 40 MPa | 32 MPa | 26 MPa |
| Elongation at break | 7 % | 35 % | 20 % | 40 % |
| Hardness | ★★★★ | ★★ | ★★★ | ★★ |
| Impact resistance (notched) | ★★★ | ★★★ | ★★ | ★★ |
| Heat resistance (Vicat) |
113 °C | 94 °C | 96 °C | 88.5 °C |
| Working temperature: | 260–280 °C |
| Heated bed: | 90–105 °C |
| Diameter: | 1.75 mm |
| Diameter tolerance: | +/- 0.05 mm |
| Weight: |
600 g of filament (+ 230 g spool)
|
| The length of the filament: |
230 m (1.75 mm, 600 g)
|
| RAL | Pantone | HEX: |
N/A | N/A | N/A |
There are no reviews yet.