Phrozen Aqua-Clear 3D Printer Model Resin – 1kg

Phrozen Clear Resin, produces highly transparent 3D printed models with ease, allowing you to print see-through models or prototypes after proper post-processing procedures This transparent resin makes your unique 3D printing designs come to life.

Key Features:
* Low Shrinkage & High Precision - Phrozen Aqua-Green is developed for low shrinkage and high precision printing. Its low warpage & dimensional stability are especially good for precise parts.
* Low Viscosity & Odour -Phrozen Aqua-Green is easy to print and post-process due to its low viscosity. Meanwhile, its low odour makes it a breeze to work with.
* Fast-Printing - Phrozen Aqua-Green is customized for 405nm LCD printer. Cure time per layer: 7 sec on Shuffle & 1.5 sec on Sonic (50µm).
* Wide Application - Printed parts have optimal hardness and toughness. Perfect match not only for models but also for prototyping.

Specification

• Weight: 1kg per bottle
• Density: 1.11 g/cm3
• Viscosity: 50 - 100 cps
• Surface Hardness: 74 Shore D
• Tensile Strength at Break: 22 MPa
• Tensile Modulus: 14 %
• Notched Izod Impact: 21.00 J/m

Operation:
* Avoid exposure to sunlight and indoor luminescence
* Return resin from VAT to bottle. Be sure to filter
* Please preserve resin in a closed opaque bottle to avoid both air and light exposure
* Do not mix resins together
* Please keep the resin away from children
* Please do not dump resin. Please dispose of responsibly. Cure and add to general waste/plastics

Safety:
* Do not eat or swallow resin. If ingested seek medical advice immediately
* Wear goggles to avoid eye contact with resin. If resin comes in to contact with eyes wash thoroughly and seek medical advice immediately
* Resin may cause slight irritation to skin. Gloves should always be worn when handling resin. If an allergic reaction occurs stop using immediately
* Resin has a mild odour. We strongly recommend you to use in a well-ventilated room or area
* Recommended safety equipment: gloves, mask, goggles
* Store resin in a cool dry place. 15-35 degrees recommended